网上书店│  标准│  公告│  动态│  购物指南
搜索
您当前的位置:首页 > 特种设备安全规范英文版
TSG D7002-2006 压力管道元件型式试验规则
【标准定价】3,000.00



由北京创力中标图书有限公司直接发书。
快递:通常1~3天送达。
【标准编号】 TSG D7002-2006
【标准名称】 压力管道元件型式试验规则
【英文名称】 Pressure Piping Components Type Test Regulation
【出版单位】

【中标分类】 J 机械 > J70/89 通用机械与设备 > J74 压力容器
【ICS 分类】 23.020.30
【代替标准】

【发布部门】 中华人民共和国国家质量监督检验检疫总局
【归口单位】 国家质检总局特种设备安全监察局
【发布日期】 2006年10月27日
【实施日期】 2007年2月1日
【出版日期】 2007年2月
内容简介

Article 1 This regulation was formulated according to the "Regulation on Safety Supervision of Special Equipment" (hereinafter referred to as "Regulation") with a view to specifying the pressure piping components type test work and ensuring the manufacturing quality of pressure piping components.

Article 2 The pressure piping components type test specified in this regulation is the technical document examination, specimen inspection and test as well as safety feature test conducted in order to verify whether the product safety meets the safety technical requirements.

Article 3 For all the pressure piping components applied in the Peoples Republic of China and meeting the application scope of "Regulation", their type test shall meet those specified in this regulation, and their safety performances shall meet the relevant safety technique specifications and the basic requirements specified in corresponding standards. In principle, the safety performances of the imported pressure piping components shall not be less than the basic requirements on safety performances of the pressure piping components in China.

This regulation excludes the type test of safety valves.

Article 4 The pressure piping components type test shall be carried out by the Type Test Institutions that are authorized by the General Administration of Quality Supervision, Inspection and Quarantine. The Type Test Institution shall carry out the pressure piping components type test within its authorized scope.

Article 5 After accepting the type test invitation of the pressure piping components manufacturing organization or its entrusted import commission agent, the pressure piping components type test institution shall develop the type test scheme according to those specified in the relevant appendix in this regulation, and also shall inform the specific testing time.

Article 6 The manufacturing organization of pressure piping components ot its entrusted import commission agent shall provide the following data when applying for the type test to the Type Test Institution.

(I) Name and address of the manufacturing organization (the import commission agent still shall provide its name and address);

(II) Name, specification scope, technical parameter as well as the accepted standards of the products applying for type test;

(III) written statement on not reporting the same application to any other type test institutions in the past;

(IV) Other data including the design documents needed in the type test.

目  录

相关标准 < 1 2 3 4 5 6 7 8 9 10 ... >

ISO 11120-1999 气瓶 150升~3000升水容量的可重复充装无缝钢管气瓶 设计、结构和试验
ISO 10692-2-2001 气瓶 微电子工业用气瓶阀的连接 第2部分:阀与瓶连接的规范和型式试验
ISO 20703-2006 气瓶.可再充装的焊接铝合金气瓶.设计、结构和试验
ISO 11118-1999 气瓶 非重复充装金属气瓶 规范和试验方法
ISO 11439-2000 气瓶 车上贮存机动车用天然气燃料用高压气瓶
ISO/TR 14600-2000 气瓶 国际质量合格评定制度 基本规则
ISO 12209-1-2000 气瓶 压缩可呼吸空气用气瓶阀的放气连接器 第1部分:轭型连接器
ISO 12209-2-2000 气瓶 压缩可呼吸空气用气瓶阀的放气连接器 第2部分:螺纹式连接器
ISO 12209-3-2000 气瓶 压缩可呼吸空气用气瓶阀的放气连接器 第3部分:230巴阀适配器
ISO 11114-2-2000 移动气瓶 气瓶和瓶阀材料与盛装气体的相容性 第2部分:非金属材料
下载相关目录

客 服 中 心

购书:010-68158435(兼传真)
   010-51769915
垂询:010-88287798
Q Q:314095987

您浏览过的标准

常 见 问 题