网上书店│  标准│  公告│  动态│  购物指南
搜索
您当前的位置:首页 > 特种设备安全规范英文版
TSG D0001-2009 压力管道安全技术监察规程 工业管道
【标准定价】1,500.00



由北京创力中标图书有限公司直接发书。
快递:通常1~3天送达。
【标准编号】 TSG D0001-2009
【标准名称】 压力管道安全技术监察规程 工业管道
【英文名称】 Pressure Pipe Safety Techmology Supervision Regulation for Industrial Pressuer Pipe
【出版单位】

【中标分类】 J 机械 > J70/89 通用机械与设备 > J74 压力容器
【ICS 分类】 23.020.30
【代替标准】

【发布部门】 中华人民共和国国家质量监督检验检疫总局
【归口单位】 国家质检总局特种设备安全监察局
【起草单位】 全国锅炉压力容器标准化技术委员会压力管道分技术委员会等
【发布日期】 2009年5月8日
【实施日期】 2009年8月1日
【出版日期】 2009年7月
【开本页数】 16 开 / 56 页
内容简介

Article 1 This regulation was formulated in line with the "Regulations on Safety Supervision for Special Equipment", with a view to ensuring the safety operation of industrial pressure pipe, ensuring the personal and property safety of the people and promoting the economic development.

Article 2 This regulation is applicable to process plants, auxiliary equipments and industrial pressure pipes (hereinafter referred to as "pipes") affiliated to the public works within the battery limit. All the process plants, auxiliary equipments and pipes shall meet all of the following requirements:

(1) Maximum operating pressure is larger than or equal to 0.lMPa (gauge pressure, similarly hereinafter);

(2) Nominal diameter (NOTE 1) is larger than 25mm;

(3) Conveyance medium is gas, steam, liquefied gas, liquid whose maximum operating temperature is higher than or equal to its normal boiling point or combustible, flammable, noxious and corrosive liquid.

Article 3 This regulation is applicable to the following pipe scope:

(1) Pipe elements, including pipe components (NOTE 2) and pipe support parts (NOTE 3);

(2) Joints between pipe elements, the first joint (weld, flange, sealing member and fastener, etc.) connecting the pipe and equipment or device, and joints between the pipes and non-pressure parts;

(3) Safety valves, bursting disc devices, flame arresters, emergency shutoff devices and other safety protection systems used for the pipes.

目  录

1 General Provisions 1
2 Pipe Elements 3
2.1 Basic Requirements 3
2.2 Materials 4
2.3 Application of Pipe Elements 5
3 Design 8
4 Installation 12
4.1 Basic Requirements 12
4.2 Welding and Heat Treatment 13
4.3 Site Manufacture and Installation 15
4.4 Visual Inspection and Nondestructive Testing of Weld joint 16
4.5 Withstand Voltage Test and Leak test 17
5 Application, Reconstruction and Maintenance 20
5.1 Application 20
5.2 Reconstruction 22
5.3 Maintenance and Repair 22
6 Periodic Inspections 23
7 Safety protection devices 25
7.1 Basic Requirements 25
7.2 Safety Relief Devices (Safety Valve and Bursting Discs Device) 27
7.3 Flame Arrester and ESV 27
7.4 Installation 28
7.5 Inspection and Maintenance 30
8 Supplementary Provisions 31
Annex A 32
Annex B 36
Annex C 37
Annex D 40
Annex E 42

相关标准 < 1 2 3 4 5 6 7 8 9 10 ... >

ISO 11120-1999 气瓶 150升~3000升水容量的可重复充装无缝钢管气瓶 设计、结构和试验
ISO 10692-2-2001 气瓶 微电子工业用气瓶阀的连接 第2部分:阀与瓶连接的规范和型式试验
ISO 20703-2006 气瓶.可再充装的焊接铝合金气瓶.设计、结构和试验
ISO 11621-1997 气瓶 改装程序
ISO 13770-1997 铝合金气瓶 避免瓶颈和瓶肩裂纹的操作要求
ISO 11118-1999 气瓶 非重复充装金属气瓶 规范和试验方法
ISO 11439-2000 气瓶 车上贮存机动车用天然气燃料用高压气瓶
ISO/TR 14600-2000 气瓶 国际质量合格评定制度 基本规则
ISO 12209-1-2000 气瓶 压缩可呼吸空气用气瓶阀的放气连接器 第1部分:轭型连接器
ISO 12209-2-2000 气瓶 压缩可呼吸空气用气瓶阀的放气连接器 第2部分:螺纹式连接器
下载相关目录

客 服 中 心

购书:010-68158435(兼传真)
   010-51769915
垂询:010-88287798
Q Q:314095987

您浏览过的标准

常 见 问 题