网上书店│  标准│  公告│  动态│  购物指南
搜索
您当前的位置:首页 > 美国材料与试验协会(ASTM)
ASTM Section4 04.07 ASTM标准年鉴 第4部分:建筑 04.07 建筑密封和密封剂;防火标准;规格石料
【标准定价】2,470.00



由北京创力中标图书有限公司直接发书。
快递:通常1~3天送达。
【标准编号】 ASTM Section4 04.07
【标准名称】 ASTM标准年鉴 第4部分:建筑 04.07 建筑密封和密封剂;防火标准;规格石料
【英文名称】 Construction 04.07 Building Seals and Sealants; Fire Standards; Dimension Stone
【出版单位】 American Society for Testing and Materials

【中标分类】 P 工程建设 > P30/39 工业与民用建筑工程 > P30 工业与民用建筑工程综合
【代替标准】

【发布部门】 American Society for Testing and Materials
【归口单位】 ASTM/TC C01~
【发布日期】
【实施日期】
【出版日期】 2009年11月
【开本页数】 16 开 / 1462 页
内容简介

Specifications, tests, and practices detail the property requirements for caulking and glazing compounds; structural, emulsion, hot-applied, and solvent-release sealants; lock-strip gaskets; aerosol foam sealants; pipe gaskets; sealing tapes; and other building sealants. Also featured are standards on how to measure sealant properties.

It includes test methods on the combustibility and fire resistance of various materials, including building construction materials, mattresses, and upholstered furniture. Other standards cover fire safety engineering and large-scale fire tests under controlled conditions.

Volume 04.07 also includes standards on dimension stone, including dimension stone anchoring systems and selection of dimension stone for exterior use.

卷 04.07
建筑密封和密封剂;防火标准;规格石料

1462页, 171个标准(详见以下“标准目录”)

目  录

C0097_C0097M-09 Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
C0099_C0099M-09 Test Method for Modulus of Rupture of Dimension Stone
C0119-08 Terminology Relating to Dimension Stone
C0120_C0120M-09 Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
C0121_C0121M-09 Test Method for Water Absorption of Slate
C0170_C0170M-09 Test Method for Compressive Strength of Dimension Stone
C0217_C0217M-09 Test Method for Weather Resistance of Slate
C0241_C0241M-09 Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic
C0406-06E01 Specification for Roofing Slate
C0503-08A Specification for Marble Dimension Stone
C0509-06 Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
C0510-05A Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
C0542-05 Specification for Lock-Strip Gaskets
C0568-08A Specification for Limestone Dimension Stone
C0603-04R08 Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
C0615-03 Specification for Granite Dimension Stone
C0616-08 Specification for Quartz-Based Dimension Stone
C0629-08 Specification for Slate Dimension Stone
C0639-01R07 Test Method for Rheological (Flow) Properties of Elastomeric Sealants
C0661-06 Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
C0679-03R09E01 Test Method for Tack-Free Time of Elastomeric Sealants
C0681-03R09 Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
C0711-03R09 Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
C0712-03R09 Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
C0716-06 Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
C0717-09 Terminology of Building Seals and Sealants
C0719-93R05 Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
C0731-00R06 Test Method for Extrudability, After Package Aging, of Latex Sealants
C0732-06 Test Method for Aging Effects of Artificial Weathering on Latex Sealants
C0734-06 Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
C0736-00R06E01 Test Method for Extension-Recovery and Adhesion of Latex Sealants
C0765-97R07 Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
C0771-03R09 Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants
C0772-03R09 Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
C0782-03R09 Test Method for Softness of Preformed Tape Sealants
C0792-04R08 Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
C0793-05 Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
C0794-06 Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
C0834-05 Specification for Latex Sealants
C0864-05 Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
C0879-03R09 Test Methods for Release Papers Used with Preformed Tape Sealants
C0880_C0880M-09 Test Method for Flexural Strength of Dimension Stone
C0907-03R08 Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
C0908-00R06 Test Method for Yield Strength of Preformed Tape Sealants
C0910-06 Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
C0919-08 Practice for Use of Sealants in Acoustical Applications
C0920-08 Specification for Elastomeric Joint Sealants
C0961-06 Test Method for Lap Shear Strength of Sealants
C0963-00R07 Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets
C0964-07 Guide for Lock-Strip Gasket Glazing
C0972-00R06 Test Method for Compression-Recovery of Tape Sealant
C1016-02R08 Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material
C1021-08 Practice for Laboratories Engaged in Testing of Building Sealants
C1083-06 Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
C1087-00R06 Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
C1115-06 Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
C1135-00R05 Test Method for Determining Tensile Adhesion Properties of Structural Sealants
C1166-06 Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
C1183-04R08 Test Method for Extrusion Rate of Elastomeric Sealants
C1184-05 Specification for Structural Silicone Sealants
C1193-09 Guide for Use of Joint Sealants
C1201_C1201M-09 Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
C1216-03R08 Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
C1241-00R09 Test Method for Volume Shrinkage of Latex Sealants During Cure
C1242-05 Guide for Selection, Design, and Installation of Dimension Stone Anchoring Systems
C1246-00R06 Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
C1247-09 Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
C1248-08 Test Method for Staining of Porous Substrate by Joint Sealants
C1249-06A Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
C1253-93R09 Test Method for Determining the Outgassing Potential of Sealant Backing
C1257-06A Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
C1265-94R05E01 Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
C1266-02R07 Test Method for Flow Characteristics of Preformed Tape Sealants
C1281-03R09 Specification for Preformed Tape Sealants for Glazing Applications
C1294-07 Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
C1299-03 Guide for Use in Selection of Liquid-Applied Sealants
C1311-02 Specification for Solvent Release Sealants
C1330-02R07 Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
C1352_C1352M-09 Test Method for Flexural Modulus of Elasticity of Dimension Stone
C1353-08 Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic
C1354_C1354M-09 Test Method for Strength of Individual Stone Anchorages in Dimension Stone
C1367-06 Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
C1369-07 Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
C1375-00R09 Guide for Substrates Used in Testing Building Seals and Sealants
C1382-05 Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
C1392-00R05 Guide for Evaluating Failure of Structural Sealant Glazing
C1394-03R08 Guide for In-Situ Structural Silicone Glazing Evaluation
C1401-09A Guide for Structural Sealant Glazing
C1442-06 Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
C1472-06 Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
C1481-00R06 Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
C1487-02R07 Guide for Remedying Structural Silicone Glazing
C1496-01 Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades
C1501-09 Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
C1515-01 Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing
C1518-04R09 Specification for Precured Elastomeric Silicone Joint Sealants
C1519-04 Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
C1520-02 Guide for Paintability of Latex Sealants
C1521-09 Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
C1523-04 Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
C1526-08 Specification for Serpentine Dimension Stone
C1527-09 Specification for Travertine Dimension Stone
C1528-08 Guide for Selection of Dimension Stone for Exterior Use
C1536-03 Test Method for Measuring the Yield for Aerosol Foam Sealants
C1564-04R09 Guide for Use of Silicone Sealants for Protective Glazing Systems
C1589-05 Practice for Outdoor Weathering of Construction Seals and Sealants
C1620-05 Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants
C1635-06 Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
C1642-07 Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials
C1643-08 Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants
C1681-09 Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
D2202-00R06 Test Method for Slump of Sealants
D2203-01R07 Test Method for Staining from Sealants
D2377-00R08 Test Method for Tack-Free Time of Caulking Compounds and Sealants
D2452-03R09 Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds
D2453-03R09 Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
D2859-06 Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials
E0084-09B Test Method for Surface Burning Characteristics of Building Materials
E0108-07A Test Methods for Fire Tests of Roof Coverings
E0119-09 Test Methods for Fire Tests of Building Construction and Materials
E0136-09 Test Method for Behavior of Materials in a Vertical Tube Furnace at 750|SDC
E0162-08B Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
E0176-08A Terminology of Fire Standards
E0535-05A Practice for Preparation of Fire-Test-Response Standards
E0603-07 Guide for Room Fire Experiments
E0648-09A Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
E0662-09 Test Method for Specific Optical Density of Smoke Generated by Solid Materials
E0800-07 Guide for Measurement of Gases Present or Generated During Fires
E0814-09 Test Method for Fire Tests of Penetration Firestop Systems
E0906-07E01 Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
E0970-08A Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
E1317-08B Test Method for Flammability of Marine Surface Finishes
E1321-09 Test Method for Determining Material Ignition and Flame Spread Properties
E1352-08A Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies
E1353-08A Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture
E1354-09 Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
E1355-05A Guide for Evaluating the Predictive Capability of Deterministic Fire Models
E1472-07 Guide for Documenting Computer Software for Fire Models
E1474-07 Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
E1529-06 Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
E1537-07 Test Method for Fire Testing of Upholstered Furniture
E1546-09A Guide for Development of Fire-Hazard-Assessment Standards
E1590-07 Test Method for Fire Testing of Mattresses
E1591-07 Guide for Obtaining Data for Deterministic Fire Models
E1623-04 Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
E1678-09 Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
E1725-08 Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
E1740-07A Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
E1776-07 Guide for Development of Fire-Risk-Assessment Standards
E1822-09 Test Method for Fire Testing of Stacked Chairs
E1895-07 Guide for Determining Uses and Limitations of Deterministic Fire Models
E1966-07 Test Method for Fire-Resistive Joint Systems
E1995-08 Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally
E2026-07 Guide for Seismic Risk Assessment of Buildings
E2032-09 Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119
E2058-09 Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
E2061-09 Guide for Fire Hazard Assessment of Rail Transportation Vehicles
E2067-08 Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
E2102-08 Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
E2187-04 Test Method for Measuring the Ignition Strength of Cigarettes
E2203-02R08 Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
E2226-08 Practice for Application of Hose Stream
E2230-08 Practice for Thermal Qualification of Type B Packages for Radioactive Material
E2231-07A Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
E2257-08 Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
E2280-09 Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
E2307-04E01 Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
E2335-08 Guide for Laboratory Monitors
E2336-04R09 Test Methods for Fire Resistive Grease Duct Enclosure Systems
E2404-08 Practice for Specimen Preparation and Mounting of Textile, Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics
E2405-05 Test Method for Determination of Fire and Thermal Parameters of Materials Using an Intermediate Scale Test with Vertically Oriented Specimen
E2536-06 Guide for Assessment of Measurement Uncertainty in Fire Tests
E2573-07A Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
E2579-07 Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
E2599-09 Practice for Specimen Preparation and Mounting of Reflective Insulation Materials and Radiant Barrier Materials for Building Applications to Assess Surface Burning Characteristics
E2652-09 Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750|SDC
E2653-09 Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories

相关标准 < 1 2 3 4 5 6 7 8 9 10 ... >

ISO 6707-2-1993 建筑和土木工程 词汇 第2部分:合同术语 两种语言版
ISO 9882-1993 建筑物的性能标准 预制混凝土楼板的性能试验在非集中荷载下的工况
ISO 9883-1993 建筑物的性能标准 预制混凝土楼板的性能试验 在集中荷载下的工况
ISO 9699-1994 建筑物的性能标准 简要检验项目 建筑设计的简要内容
ISO/R 1226-1970 门,窗和百叶窗的关闭方向和立面的符号标记.第1部分
ISO 15686-10-2010 房屋和建筑资产.使用寿命计划.第10部分:何时评价试验性能
ISO 21931-1-2010 房屋建筑的可持续性.建筑工程的环境性能的评价方法用结构.第1部分:建筑物
ISO 15686-1-2011 建筑物与建筑物资产.使用计划.第1部分:一般原则与框架
ISO 4463-3-1995 建筑物的测量方法 定线和测量 第3部分:观测和测量作业所获资料的检查目录
ISO 4463-2-1995 建筑物的测量方法 定线和测量 第2部分:测站和目标
下载相关目录

客 服 中 心

购书:010-68158435(兼传真)
   010-51769915
垂询:010-88287798
Q Q:314095987

您浏览过的标准

常 见 问 题