网上书店│  标准│  公告│  动态│  购物指南
搜索
您当前的位置:首页 > 美国材料与试验协会(ASTM)
ASTM Section4 04.06 ASTM标准年鉴 第4部分:建筑 04.06 绝热;环境声学
【标准定价】2,772.00



由北京创力中标图书有限公司直接发书。
快递:通常1~3天送达。
【标准编号】 ASTM Section4 04.06
【标准名称】 ASTM标准年鉴 第4部分:建筑 04.06 绝热;环境声学
【英文名称】 Construction 04.06 Thermal Insulation; Building and Environmental Acoustics
【出版单位】 American Society for Testing and Materials

【中标分类】 P 工程建设 > P30/39 工业与民用建筑工程 > P30 工业与民用建筑工程综合
【代替标准】

【发布部门】 American Society for Testing and Materials
【归口单位】 ASTM/TC C01~
【发布日期】
【实施日期】
【出版日期】 2009年11月
【开本页数】 16 开 / 1328 页
内容简介

Volume 04.06 features specifications that establish the property requirements for various types of insulation, including blanket, block, board, loose fill, cement, and pipe.

Standards on environmental acoustics address community noise, acoustical materials and systems, mechanical and electrical system noise, open plan spaces, sound absorption, and sound transmission.

卷 04.06
绝热;环境声学
1328页, 202个标准(详见以下“标准目录”)

目  录

C0163-05 Practice for Mixing Thermal Insulating Cement Samples
C0165-07 Test Method for Measuring Compressive Properties of Thermal Insulations
C0166-05 Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement
C0167-09 Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
C0168-08B Terminology Relating to Thermal Insulation
C0177-04 Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
C0195-07 Specification for Mineral Fiber Thermal Insulating Cement
C0196-00R05 Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
C0203-05A Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
C0208-08A Specification for Cellulosic Fiber Insulating Board
C0209-07AE01 Test Methods for Cellulosic Fiber Insulating Board
C0240-08E01 Test Methods of Testing Cellular Glass Insulation Block
C0302-95R07 Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
C0303-07 Test Method for Dimensions and Density of Preformed Block and Board\NType Thermal Insulation
C0335-05AE01 Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
C0356-03 Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
C0367-05 Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels
C0384-04 Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
C0390-08E01 Practice for Sampling and Acceptance of Thermal Insulation Lots
C0411-05 Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
C0419-08 Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
C0421-08 Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation
C0423-08A Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
C0447-03 Practice for Estimating the Maximum Use Temperature of Thermal Insulations
C0449-07 Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
C0450-08 Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging
C0461-81R08 Test Methods for Mastics and Coatings Used With Thermal Insulation
C0488-05 Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
C0516-08 Specification for Vermiculite Loose Fill Thermal Insulation
C0518-04 Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
C0520-04 Test Methods for Density of Granular Loose Fill Insulations
C0522-03 Test Method for Airflow Resistance of Acoustical Materials
C0533-09 Specification for Calcium Silicate Block and Pipe Thermal Insulation
C0534_C0534M-08 Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
C0547-07E01 Specification for Mineral Fiber Pipe Insulation
C0549-06 Specification for Perlite Loose Fill Insulation
C0550-03 Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation
C0552-07 Specification for Cellular Glass Thermal Insulation
C0553-08 Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
C0578-09E01 Specification for Rigid, Cellular Polystyrene Thermal Insulation
C0585-09 Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing
C0591-08A Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
C0592-08A Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
C0610-09 Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
C0612-04E01 Specification for Mineral Fiber Block and Board Thermal Insulation
C0634-09 Terminology Relating to Building and Environmental Acoustics
C0635_C0635M-07 Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
C0636_C0636M-08 Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels
C0647-08 Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
C0653-97R07 Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation
C0656-07 Specification for Structural Insulating Board, Calcium Silicate
C0665-06 Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
C0667-09 Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
C0680-08 Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs
C0686-90R07 Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation
C0687-07 Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
C0692-08 Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
C0726-05E01 Specification for Mineral Fiber Roof Insulation Board
C0727-01R07E01 Practice for Installation and Use of Reflective Insulation in Building Constructions
C0728-05 Specification for Perlite Thermal Insulation Board
C0739-08 Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
C0740-97R04 Practice for Evacuated Reflective Insulation In Cryogenic Service
C0755-03 Practice for Selection of Water Vapor Retarders for Thermal Insulation
C0764-07 Specification for Mineral Fiber Loose-Fill Thermal Insulation
C0795-08 Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
C0800-08 Specification for Fibrous Glass Blanket Insulation (Aircraft Type)
C0835-06 Test Method for Total Hemispherical Emittance of Surfaces up to 1400|SDC
C0846-94R09 Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing
C0870-96R04 Practice for Conditioning of Thermal Insulating Materials
C0871-08A Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
C0892-05 Specification for High-Temperature Fiber Blanket Thermal Insulation
C0916-85R07 Specification for Adhesives for Duct Thermal Insulation
C0921-09 Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
C0929-94R04E01 Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel
C0930-05 Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories
C0945-05 Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
C0950_C0950M-08 Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
C0991-08E01 Specification for Flexible Fibrous Glass Insulation for Metal Buildings
C1014-08 Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
C1015-06 Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
C1029-08 Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
C1041-85R07 Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers
C1043-06 Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources
C1044-07 Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode
C1045-07 Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
C1046-95R07 Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
C1055-03 Guide for Heated System Surface Conditions that Produce Contact Burn Injuries
C1057-03 Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer
C1058-03R08 Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
C1060-90R03 Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
C1071-05E01 Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
C1086-09 Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation
C1094-01R06 Guide for Flexible Removable Insulation Covers
C1101_C1101M-06 Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation
C1104_C1104M-00R06 Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
C1114-06 Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
C1126-04 Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
C1129-89R08 Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
C1130-07 Practice for Calibrating Thin Heat Flux Transducers
C1134-90R07 Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
C1136-08 Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
C1139-08 Specification for Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications
C1146-09 Guide for Prefabricated Panel and H\Nbar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air
C1149-08 Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
C1153-97R03E01 Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
C1155-95R07 Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
C1158-05 Practice for Installation and Use of Radiant Barrier Systems (RBS) in Building Construction
C1199-09E01 Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
C1224-03 Specification for Reflective Insulation for Building Applications
C1258-08 Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
C1263-95R05 Test Method for Thermal Integrity of Flexible Water Vapor Retarders
C1289-08 Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
C1290-06E01 Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
C1302-04 Guide for Selection and Use of Keywords for Thermal Insulation Test Methods and Standards
C1303-08E01 Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
C1304-08 Test Method for Assessing the Odor Emission of Thermal Insulation Materials
C1313-05 Specification for Sheet Radiant Barriers for Building Construction Applications
C1320-05 Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction
C1321-04 Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction
C1335-04 Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
C1338-08 Test Method for Determining Fungi Resistance of Insulation Materials and Facings
C1340-04 Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program
C1363-05 Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
C1371-04A Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
C1373-03 Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions
C1374-03 Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
C1393-08 Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
C1409-08 Guide for Measuring and Estimating Quantities of Insulated Piping and Components
C1410-05A Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
C1423-98R03 Guide for Selecting Jacketing Materials for Thermal Insulation
C1427-07 Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
C1482-09 Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
C1483-04 Specification for Exterior Solar Radiation Control Coatings on Buildings
C1484-09 Specification for Vacuum Insulation Panels
C1485-06 Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source
C1488-04E01 Practice for Simulated Aging of Cellulosic Loose-Fill Insulation
C1497-04 Specification for Cellulosic Fiber Stabilized Thermal Insulation
C1498-04A Test Method for Hygroscopic Sorption Isotherms of Building Materials
C1511-04R09 Test Method for Determining the Water Retention (Repellency) Characteristics of Fibrous Glass Insulation (Aircraft Type)
C1512-07 Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
C1534-07 Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems
C1549-04 Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
C1558-03R07 Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
C1559-04R09 Test Method for Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type)
C1574-04R08E01 Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation
C1594-07 Specification for Polyimide Rigid Cellular Thermal Insulation
C1616-07E01 Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
C1617-05 Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals
C1630-06 Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations
C1631-08 Specification for Cellular Polypropylene Thermal Insulation
C1639-07 Specification for Fabrication Of Cellular Glass Pipe And Tubing Insulation
C1667-09 Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
C1668-09 Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems
C1676-08 Specification for Microporous Thermal Insulation
C1685-08 Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications
C1699-09 Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
E0090-09 Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
E0096_E0096M-05 Test Methods for Water Vapor Transmission of Materials
E0336-09 Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
E0413-04 Classification for Rating Sound Insulation
E0477-06A Test Method for Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
E0492-09 Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
E0557-00R06 Guide for The Installation of Operable Partitions
E0580_E0580M-09A Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions
E0596-96R09 Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
E0756-05 Test Method for Measuring Vibration-Damping Properties of Materials
E0795-05 Practices for Mounting Test Specimens During Sound Absorption Tests
E0966-04 Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements
E0989-06 Classification for Determination of Impact Insulation Class (IIC)
E1007-04E01 Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
E1014-08 Guide for Measurement of Outdoor A-Weighted Sound Levels
E1042-02R08 Classification for Acoustically Absorptive Materials Applied by Trowel or Spray
E1050-08 Test Method for Impedance and Absorption of Acoustical Materials Using A Tube, Two Microphones and A Digital Frequency Analysis System
E1110-06 Classification for Determination of Articulation Class
E1111-07 Test Method for Measuring the Interzone Attenuation of Open Office Components
E1123-86R09 Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials
E1124-97R04 Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
E1130-08 Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index
E1179-07 Specification for Sound Sources Used for Testing Open Office Components and Systems
E1222-90R09 Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems
E1264-08 Classification for Acoustical Ceiling Products
E1265-04 Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers
E1289-08 Specification for Reference Specimen for Sound Transmission Loss
E1332-90R03 Classification for Determination of Outdoor-Indoor Transmission Class
E1374-06 Guide for Open Office Acoustics and Applicable ASTM Standards
E1414-06 Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
E1433-04 Guide for Selection of Standards on Environmental Acoustics
E1503-06 Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
E1573-09 Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels
E1574-98R06 Test Method for Measurement of Sound in Residential Spaces
E1686-03 Guide for Selection of Environmental Noise Measurements and Criteria
E1704-95R02 Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures
E1779-96AR04 Guide for Preparing a Measurement Plan for Conducting Outdoor Sound Measurements
E1780-04 Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source
E2179-03R09 Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors
E2202-02R09 Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards
E2235-04E01 Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods
E2249-02R08 Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity
E2459-05 Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans
E2611-09 Test Method for Measurement of Normal Incidence Sound Transmission of Acoustical Materials Based on the Transfer Matrix Method
E2638-08 Test Method for Objective Measurement of the Speech Privacy Provided by a Closed Room

相关标准 < 1 2 3 4 5 6 7 8 9 10 ... >

ISO 4463-3-1995 建筑物的测量方法 定线和测量 第3部分:观测和测量作业所获资料的检查目录
ISO 6707-2-1993 建筑和土木工程 词汇 第2部分:合同术语 两种语言版
ISO 9882-1993 建筑物的性能标准 预制混凝土楼板的性能试验在非集中荷载下的工况
ISO 9883-1993 建筑物的性能标准 预制混凝土楼板的性能试验 在集中荷载下的工况
ISO 9699-1994 建筑物的性能标准 简要检验项目 建筑设计的简要内容
ISO 1804-1972 门 术语
ISO 2848-1984 房屋建筑.模数协调.原理和规定
ISO 12494-2001 结构的大气结冰
ISO/PAS 22539-2007 ISO 15928用户指南.房屋.性能描述
ISO 3880-1-1977 房屋建筑 楼梯 词汇 第1部分 两种语言版
下载相关目录

客 服 中 心

购书:010-68158435(兼传真)
   010-51769915
垂询:010-88287798
Q Q:314095987

您浏览过的标准

常 见 问 题