网上书店│  标准│  公告│  动态│  购物指南
搜索
您当前的位置:首页 > 美国材料与试验协会(ASTM)
ASTM Section4 04.05 ASTM标准年鉴 第4部分:建筑 04.05 耐化学腐蚀的非金属材料;陶管;混凝土管;纤维增强水泥制品;灰浆和水泥浆;圬工
【标准定价】2,436.00



由北京创力中标图书有限公司直接发书。
快递:通常1~3天送达。
【标准编号】 ASTM Section4 04.05
【标准名称】 ASTM标准年鉴 第4部分:建筑 04.05 耐化学腐蚀的非金属材料;陶管;混凝土管;纤维增强水泥制品;灰浆和水泥浆;圬工
【英文名称】 Construction 04.05 Chemical-Resistant Nonmetallic Materials; Vitrified Clay Pipe; Concrete Pipe; Fiber-Reinforced Cement Products; Mortars and Grouts; Masonry; Precast Concrete
【出版单位】 American Society for Testing and Materials

【中标分类】 P 工程建设 > P30/39 工业与民用建筑工程 > P30 工业与民用建筑工程综合
【代替标准】

【发布部门】 American Society for Testing and Materials
【归口单位】 ASTM/TC C01~
【发布日期】
【实施日期】
【出版日期】 2009年6月
【开本页数】 16 开 / 1456 页
内容简介

Under the heading of chemical-resistant nonmetallic materials, this volume provides specifications, tests, and practices for measuring the properties of mortars, grouts, and monolithic surfacing.

Also included are standards on mortar and grout for masonry construction and manufactured masonry units. Volume 04.05 also features specifications for concrete pipe, joints, manholes, vitrified clay pipe, clay drain tile, fiber-cement products, and precast concrete products.

卷 04.05
耐化学腐蚀的非金属材料;陶管;混凝土管;纤维增强水泥制品;灰浆和水泥浆;圬工

1456页, 281个标准(详见以下“标准目录”)

目  录

C0004-04E01 Specification for Clay Drain Tile and Perforated Clay Drain Tile
C0012-08 Practice for Installing Vitrified Clay Pipe Lines
C0014-07 Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
C0014M-07 Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)
C0032-05 Specification for Sewer and Manhole Brick (Made From Clay or Shale)
C0034-03 Specification for Structural Clay Load-Bearing Wall Tile
C0055-06E01 Specification for Concrete Building Brick
C0056-05 Specification for Structural Clay Nonloadbearing Tile
C0062-08 Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)
C0067-08 Test Methods for Sampling and Testing Brick and Structural Clay Tile
C0073-05 Specification for Calcium Silicate Brick (Sand-Lime Brick)
C0076-08A Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
C0076M-08A Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)
C0090-08 Specification for Loadbearing Concrete Masonry Units
C0118-05A Specification for Concrete Pipe for Irrigation or Drainage
C0118M-05A Specification for Concrete Pipe for Irrigation or Drainage (Metric)
C0126-99R05 Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
C0129-06 Specification for Nonloadbearing Concrete Masonry Units
C0139-05 Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes
C0140-08A Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
C0144-04 Specification for Aggregate for Masonry Mortar
C0159-06 Specification for Vitrified Clay Filter Blocks
C0212-00R06 Specification for Structural Clay Facing Tile
C0216-07A Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
C0220-91R04E01 Specification for Flat Asbestos-Cement Sheets
C0221-98R08 Specification for Corrugated Asbestos-Cement Sheets
C0222-97R08 Specification for Asbestos-Cement Roofing Shingles
C0223-98R08 Specification for Asbestos-Cement Siding
C0267-01R06 Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
C0270-08A Specification for Mortar for Unit Masonry
C0279-88R07 Specification for Chemical-Resistant Masonry Units
C0287-98R08E01 Specification for Chemical-Resistant Sulfur Mortar
C0296-00R04E01 Specification for Asbestos-Cement Pressure Pipe
C0301-04 Test Methods for Vitrified Clay Pipe
C0307-03R08 Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
C0308-00R05 Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars
C0315-07 Specification for Clay Flue Liners and Chimney Pots
C0321-00R05 Test Method for Bond Strength of Chemical-Resistant Mortars
C0361-08 Specification for Reinforced Concrete Low-Head Pressure Pipe
C0361M-08 Specification for Reinforced Concrete Low-Head Pressure Pipe (Metric)
C0386-93R08 Practice for Use of Chemical-Resistant Sulfur Mortar
C0395-01R06 Specification for Chemical-Resistant Resin Mortars
C0397-00R05 Practice for Use of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
C0398-98R08 Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry
C0399-98R08E01 Practice for Use of Chemical-Resistant Resin Mortars
C0404-07 Specification for Aggregates for Masonry Grout
C0410-08 Specification for Industrial Floor Brick
C0412-05A Specification for Concrete Drain Tile
C0412M-05A Specification for Concrete Drain Tile (Metric)
C0413-01R06 Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C0414-03R08 Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
C0425-04 Specification for Compression Joints for Vitrified Clay Pipe and Fittings
C0426-07 Test Method for Linear Drying Shrinkage of Concrete Masonry Units
C0428-05R06 Specification for Asbestos-Cement Nonpressure Sewer Pipe
C0443-05A Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
C0443M-07 Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric)
C0444-03 Specification for Perforated Concrete Pipe
C0444M-03 Specification for Perforated Concrete Pipe (Metric)
C0458-98R06 Test Method for Organic Fiber Content of Asbestos-Cement Products
C0459-97R06 Test Methods for Asbestos-Cement Flat Products
C0466-03R08 Specification for Chemically Setting Silicate and Silica Chemical-Resistant Mortars
C0476-08 Specification for Grout for Masonry
C0478-09 Specification for Precast Reinforced Concrete Manhole Sections
C0478M-09 Specification for Precast Reinforced Concrete Manhole Sections (Metric)
C0479-04R08 Specification for Vitrified Clay Liner Plates
C0497-05 Test Methods for Concrete Pipe, Manhole Sections, or Tile
C0497M-05 Test Methods for Concrete Pipe, Manhole Sections, or Tile (Metric)
C0500-07 Test Methods for Asbestos-Cement Pipe
C0505-05A Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
C0505M-05A Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)
C0506-08A Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
C0506M-08A Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)
C0507-08A Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
C0507M-08A Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)
C0508-00R04 Specification for Asbestos-Cement Underdrain Pipe
C0515-95R07 Specification for Chemical-Resistant Ceramic Tower Packings
C0530-99R05 Specification for Structural Clay Nonloadbearing Screen Tile
C0531-00R05 Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C0541-98R06 Specification for Linings for Asbestos-Cement Pipe
C0551-07 Specification for Asbestos-Cement Fiberboard Insulating Panels
C0579-01R06 Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C0580-02R08 Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C0652-09 Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
C0654-05A Specification for Porous Concrete Pipe
C0654M-05A Specification for Porous Concrete Pipe (Metric)
C0655-07 Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
C0655M-04E01 Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)
C0658-98R08 Specification for Chemical-Resistant Resin Grouts for Brick or Tile
C0659-90R08 Specification for Asbestos-Cement Organic-Foam Core Insulating Panels
C0663-98R08 Specification for Asbestos-Cement Storm Drain Pipe
C0668-98R08 Specification for Asbestos-Cement Transmission Pipe
C0700-07A Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
C0722-04 Specification for Chemical-Resistant Monolithic Floor Surfacings
C0723-98R08 Practice for Chemical-Resistant Resin Grouts for Brick or Tile
C0725-90R08 Specification for Semidense Mineral Fiber Siding
C0744-08 Specification for Prefaced Concrete and Calcium Silicate Masonry Units
C0746-90R08 Specification for Corrugated Asbestos-Cement Sheets for Bulkheading
C0780-08A Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
C0811-98R08 Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings
C0822-08B Terminology Relating to Concrete Pipe and Related Products
C0825-06 Specification for Precast Concrete Barriers
C0828-06 Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
C0857-07 Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
C0858-09 Specification for Underground Precast Concrete Utility Structures
C0868-02R08 Test Method for Chemical Resistance of Protective Linings
C0875-98R08 Specification for Asbestos-Cement Conduit
C0877-08 Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
C0877M-02E01 Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)
C0887-05 Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
C0890-06 Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
C0891-90R03 Practice for Installation of Underground Precast Concrete Utility Structures
C0896-04 Terminology Relating to Clay Products
C0901-01 Specification for Prefabricated Masonry Panels
C0902-09 Specification for Pedestrian and Light Traffic Paving Brick
C0904-01R06 Terminology Relating to Chemical-Resistant Nonmetallic Materials
C0905-01R06 Test Methods for Apparent Density of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C0913-08 Specification for Precast Concrete Water and Wastewater Structures
C0915-79R02 Specification for Precast Reinforced Concrete Crib Wall Members
C0923-08 Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals
C0923M-08B Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric)
C0924-02 Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method
C0924M-02 Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric)
C0935-80R02 Specification for General Requirements for Prestressed Concrete Poles Statically Cast
C0936-08 Specification for Solid Concrete Interlocking Paving Units
C0946-91R01 Practice for Construction of Dry-Stacked, Surface-Bonded Walls
C0947-03 Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
C0948-81R01 Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete
C0952-02E01 Test Method for Bond Strength of Mortar to Masonry Units
C0966-98R08 Guide for Installing Asbestos-Cement Nonpressure Pipe
C0969-02 Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
C0969M-02 Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
C0980-88R07 Specification for Industrial Chimney Lining Brick
C0985-04E01 Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
C0985M-04E01 Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe (Metric)
C0990-08 Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
C0990M-08 Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)
C1006-07 Test Method for Splitting Tensile Strength of Masonry Units
C1019-09 Test Method for Sampling and Testing Grout
C1037-08 Practice for Inspection of Underground Precast Concrete Utility Structures
C1072-06 Test Method for Measurement of Masonry Flexural Bond Strength
C1080-98R08 Specification for Asbestos-Cement Products Other Than Fill For Cooling Towers
C1081-98R08 Specification for Asbestos-Cement Corrugated Fill For Use in Cooling Towers
C1082-98R08 Specification for Asbestos-Cement Flat Sheet for Cooling Tower Fill
C1088-09 Specification for Thin Veneer Brick Units Made From Clay or Shale
C1089-06 Specification for Spun Cast Prestressed Concrete Poles
C1091-03AR08 Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
C1093-08 Practice for Accreditation of Testing Agencies for Masonry
C1096-07 Test Method for Determination of Wood Fiber in Asbestos Cement
C1103-03 Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
C1103M-03 Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
C1106-00R05 Test Methods for Chemical Resistance and Physical Properties of Carbon Brick
C1119-90R04E01 Test Method for Vacuum Drainage of Asbestos-Cement Mixes
C1120-98R06 Test Method for Wash Test of Asbestos
C1121-04E01 Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos
C1122-90R04E01 Test Method for Wet Volume of Asbestos
C1123-90R04E01 Test Method for Compressibility and Recovery of Asbestos
C1124-90R04E01 Test Method for Kerosene Retention of Asbestos
C1125-89R04E01 Test Method for Penetration Index of Asbestos
C1131-95R07 Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
C1142-95R07 Specification for Extended Life Mortar for Unit Masonry
C1147-01R06 Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
C1148-92AR08 Test Method for Measuring the Drying Shrinkage of Masonry Mortar
C1154-06 Terminology for Non-Asbestos Fiber-Reinforced Cement Products
C1159-98R08 Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete
C1160-97R08 Specification for Chemical-Resistant Carbon Brick
C1162-90R04E01 Test Method for Loose Density of Asbestos
C1167-03 Specification for Clay Roof Tiles
C1180-07 Terminology of Mortar and Grout for Unit Masonry
C1181-00R05 Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
C1185-08 Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
C1186-08 Specification for Flat Fiber-Cement Sheets
C1194-03 Test Method for Compressive Strength of Architectural Cast Stone
C1195-03 Test Method for Absorption of Architectural Cast Stone
C1196-04 Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements
C1197-04 Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
C1208_C1208M-08 Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels
C1214-02 Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
C1214M-02 Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
C1225-08 Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates
C1227-09 Specification for Precast Concrete Septic Tanks
C1228-96R04 Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
C1229-94R01 Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test)
C1230-96R04 Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
C1232-09 Terminology of Masonry
C1244-05AE01 Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
C1244M-05AE01 Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric)
C1261-07 Specification for Firebox Brick for Residential Fireplaces
C1262-08A Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
C1272-07 Specification for Heavy Vehicular Paving Brick
C1283-07A Practice for Installing Clay Flue Lining
C1288-99R04E01 Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets
C1298-95R07 Guide for Design and Construction of Brick Liners for Industrial Chimneys
C1312-97R08 Practice for Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test Specimens in the Laboratory
C1314-07 Test Method for Compressive Strength of Masonry Prisms
C1319-01R06 Specification for Concrete Grid Paving Units
C1324-05 Test Method for Examination and Analysis of Hardened Masonry Mortar
C1325-08B Specification for Non-Asbestos Fiber-Mat Reinforced Cementitious Backer Units
C1339-02R08 Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts
C1357-05 Test Methods for Evaluating Masonry Bond Strength
C1364-07 Specification for Architectural Cast Stone
C1370-00R05 Test Method for Determining Chemical Resistance of Aggregates for Use in Chemical-Resistant Sulfur Polymer Cement Concrete and Other Chemical-Resistant Polymer Concretes
C1372-04E02 Specification for Dry-Cast Segmental Retaining Wall Units
C1384-06A Specification for Admixtures for Masonry Mortars
C1386-07 Specification for Precast Autoclaved Aerated Concrete (AAC) Wall Construction Units
C1400-01R07 Guide for Reduction of Efflorescence Potential in New Masonry Walls
C1403-06 Test Method for Rate of Water Absorption of Masonry Mortars
C1405-08 Specification for Glazed Brick (Single Fired, Brick Units)
C1417-08 Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
C1417M-08 Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
C1433-08 Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
C1433M-08A Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)
C1447_C1447M-04E01 Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
C1448_C1448M-05 Specification for Non-Asbestos Fiber-Cement Conduit
C1449_C1449M-05A Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe
C1450_C1450M-04 Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe
C1452-00R06 Specification for Reinforced Autoclaved Aerated Concrete Elements
C1459-04E01 Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems
C1478-08 Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals
C1478M-08A Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric)
C1479-07A Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
C1479M-07A Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric)
C1486-00R08 Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings
C1491-03 Specification for Concrete Roof Pavers
C1492-03 Specification for Concrete Roof Tile
C1504-04E02 Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
C1504M-04E02 Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
C1530-04 Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses
C1531-03 Test Methods for In Situ Measurement Of Masonry Mortar Joint Shear Strength Index
C1532-06 Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction
C1552-08A Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
C1555-03A Practice for Autoclaved Aerated Concrete Masonry
C1560-03 Test Method for Hot Water Accelerated Aging of Glass-Fiber Reinforced Cement-Based Composites
C1568-08 Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
C1569-03 Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Wind Tunnel Method)
C1570-03 Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Air Permeability Method)
C1577-08 Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
C1586-05 Guide for Quality Assurance of Mortars
C1587-06 Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Compressive Strength Testing
C1591-04 Test Method for Determination of the Modulus of Elasticity of AAC
C1601-08 Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces
C1613-09 Specification for Precast Concrete Grease Interceptor Tanks
C1618-05 Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure
C1618M-05 Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure (Metric)
C1619-05 Specification for Elastomeric Seals for Joining Concrete Structures
C1623-06 Specification for Manufactured Concrete Masonry Lintels
C1628-06 Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets
C1634-06 Specification for Concrete Facing Brick
C1644-06 Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes
C1645-06 Test Method for Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units
C1666_C1666M-08 Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement
C1677-09 Specification for Joints for Concrete Box, Using Rubber Gaskets
C1704_C1704M-09 Test Method for Sampling and Testing Structural Cementitious Panels
C1705_C1705M-09 Specification for Structural Cementitious Panels
D0299-04E01 Specification for Asbestos Yarns
D0315-95R04E01 Specification for Woven Asbestos Tape
D0375-95R04E01 Specification for Asbestos Roving
D0628-95R04E01 Specification for Asbestos Tubular Sleeving
D1061-95R04E01 Specification for Asbestos Lap
D1118-95R04E02 Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles
D1571-95R04E01 Specification for Woven Asbestos Cloth
D1573-95R04E01 Test Method for Heat Aging of Asbestos Textiles
D1918-95R04E01 Test Method for Asbestos Content of Asbestos Textiles
D2100-95R04E01 Specification for Asbestos Textiles Used for Electrical Insulating Purposes
D2589-88R06 Test Method for McNett Wet Classification of Dual Asbestos Fiber
D2590-98R06E01 Test Method for Sampling Chrysotile Asbestos
D2752-88R06 Test Methods for Air Permeability of Asbestos Fibers
D2946-01R05 Terminology for Asbestos and Asbestos\NCement Products
D2947-88R06 Test Method for Screen Analysis of Asbestos Fibers
D2985-92R06 Test Method for Color of Asbestos
D2987-88R06 Test Method for Moisture Content of Asbestos Fiber
D3639-92R06 Test Method for Classification of Asbestos by Quebec Standard Test
D3752-98R06 Test Method for Strength Imparted by Asbestos to a Cementitious Matrix
D3879-91R04E01 Test Method for Sampling Amphibole Asbestos
D3880-90R04E01 Test Method for Asbestos Strength Units
E0514-08 Test Method for Water Penetration and Leakage Through Masonry
E0518-03 Test Methods for Flexural Bond Strength of Masonry
E0519-07 Test Method for Diagonal Tension (Shear) in Masonry Assemblages

相关标准 < 1 2 3 4 5 6 7 8 9 10 ... >

ISO 6707-2-1993 建筑和土木工程 词汇 第2部分:合同术语 两种语言版
ISO 9882-1993 建筑物的性能标准 预制混凝土楼板的性能试验在非集中荷载下的工况
ISO 9883-1993 建筑物的性能标准 预制混凝土楼板的性能试验 在集中荷载下的工况
ISO 9699-1994 建筑物的性能标准 简要检验项目 建筑设计的简要内容
ISO 1804-1972 门 术语
ISO 2848-1984 房屋建筑.模数协调.原理和规定
ISO 12494-2001 结构的大气结冰
ISO/PAS 22539-2007 ISO 15928用户指南.房屋.性能描述
ISO 4463-3-1995 建筑物的测量方法 定线和测量 第3部分:观测和测量作业所获资料的检查目录
ISO 4463-2-1995 建筑物的测量方法 定线和测量 第2部分:测站和目标
下载相关目录

客 服 中 心

购书:010-68158435(兼传真)
   010-51769915
垂询:010-88287798
Q Q:314095987

您浏览过的标准

常 见 问 题