网上书店│  标准│  公告│  动态│  购物指南
搜索
您当前的位置:首页 > 美国材料与试验协会(ASTM)
ASTM Section4 04.01 ASTM标准年鉴 第4部分:建筑 04.01 水泥、石灰;石膏
【标准定价】1,739.00



由北京创力中标图书有限公司直接发书。
快递:通常1~3天送达。
【标准编号】 ASTM Section4 04.01
【标准名称】 ASTM标准年鉴 第4部分:建筑 04.01 水泥、石灰;石膏
【英文名称】 Construction 04.01 Cement;Lime;Gypsum
【出版单位】 American Society for Testing and Materials

【中标分类】 P 工程建设 > P30/39 工业与民用建筑工程 > P30 工业与民用建筑工程综合
【代替标准】

【发布部门】 American Society for Testing and Materials
【归口单位】 ASTM/TC C01~
【发布日期】
【实施日期】
【出版日期】 2009年9月
【开本页数】 16 开 / 742 页
内容简介

Volume 04.01 features specifications and test methods that establish the property requirements and measurement procedures for hydraulic cements, including portland, natural, pozzolanic, masonry, and slag.

It includes standards that define the appropriate qualities of lime and limestone and how to analyze them for environmental and industrial uses.

The remaining standards in this volume address gypsum and related building materials and systems, including application procedures and related accessories including exterior insulation and finishing systems (EIFS).

卷 04.01
水泥、石灰;石膏
742页, 129个标准(详见以下“标准目录”)

目  录

C0005-03 Specification for Quicklime for Structural Purposes
C0010-07 Specification for Natural Cement
C0011-08C Terminology Relating to Gypsum and Related Building Materials and Systems
C0022_C0022M-00R05E01 Specification for Gypsum
C0025-06 Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
C0028_C0028M-00R05 Specification for Gypsum Plasters
C0035-01R05 Specification for Inorganic Aggregates for Use in Gypsum Plaster
C0050-00R06 Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
C0051-07 Terminology Relating to Lime and Limestone (as used by the Industry)
C0059_C0059M-00R06 Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
C0061_C0061M-00R06 Specification for Gypsum Keenes Cement
C0091-05 Specification for Masonry Cement
C0109_C0109M-08 Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or \[50-mm\] Cube Specimens)
C0110-09 Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
C0114-09 Test Methods for Chemical Analysis of Hydraulic Cement
C0115-96AR03 Test Method for Fineness of Portland Cement by the Turbidimeter
C0141-97R05 Specification for Hydraulic Hydrated Lime for Structural Purposes
C0150-07 Specification for Portland Cement
C0151_C0151M-09 Test Method for Autoclave Expansion of Hydraulic Cement
C0183-08 Practice for Sampling and the Amount of Testing of Hydraulic Cement
C0185-08 Test Method for Air Content of Hydraulic Cement Mortar
C0186-05 Test Method for Heat of Hydration of Hydraulic Cement
C0187-04 Test Method for Normal Consistency of Hydraulic Cement
C0188-95R03 Test Method for Density of Hydraulic Cement
C0191-08 Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
C0204-07 Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
C0206-03 Specification for Finishing Hydrated Lime
C0207-06 Specification for Hydrated Lime for Masonry Purposes
C0219-07A Terminology Relating to Hydraulic Cement
C0226-07 Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement
C0230_C0230M-08 Specification for Flow Table for Use in Tests of Hydraulic Cement
C0265-08 Test Method for Water-Extractable Sulfate in Hydrated Hydraulic Cement Mortar
C0266-08 Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
C0305-06 Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
C0317_C0317M-00R05 Specification for Gypsum Concrete
C0318_C0318M-00R05 Specification for Gypsum Formboard
C0348-08 Test Method for Flexural Strength of Hydraulic-Cement Mortars
C0349-08 Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
C0359-08 Test Method for Early Stiffening of Hydraulic Cement (Mortar Method)
C0400-98R06 Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid
C0430-08 Test Method for Fineness of Hydraulic Cement by the 45-|gmm (No. 325) Sieve
C0451-08 Test Method for Early Stiffening of Hydraulic Cement (Paste Method)
C0452-06 Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate
C0465-09 Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements
C0471M-01R06E01 Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)
C0472-99R04 Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete
C0473-07 Test Methods for Physical Testing of Gypsum Panel Products
C0474-05 Test Methods for Joint Treatment Materials for Gypsum Board Construction
C0475_C0475M-02R07 Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
C0490_C0490M-08 Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
C0511-06 Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
C0514-04 Specification for Nails for the Application of Gypsum Board
C0563-07 Test Method for Approximation of Optimum SO3 in Hydraulic Cement Using Compressive Strength
C0587-04 Specification for Gypsum Veneer Plaster
C0593-06 Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization
C0595-08A Specification for Blended Hydraulic Cements
C0596-07 Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
C0602-07 Specification for Agricultural Liming Materials
C0631-09 Specification for Bonding Compounds for Interior Gypsum Plastering
C0645-08A Specification for Nonstructural Steel Framing Members
C0688-08 Specification for Functional Additions for Use in Hydraulic Cements
C0706-02R08E01 Specification for Limestone for Animal Feed Use
C0737-08 Specification for Limestone for Dusting of Coal Mines
C0754-09 Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
C0778-06 Specification for Standard Sand
C0786-96R03 Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-|gmm (No. 50), 150-|gmm (No. 100), and 75-|gmm (No. 200) Sieves by Wet Methods
C0806-04 Test Method for Restrained Expansion of Expansive Cement Mortar
C0807-08 Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
C0840-08 Specification for Application and Finishing of Gypsum Board
C0841-03R08E01 Specification for Installation of Interior Lathing and Furring
C0842-05 Specification for Application of Interior Gypsum Plaster
C0843-99R06 Specification for Application of Gypsum Veneer Plaster
C0844-04 Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
C0845-04 Specification for Expansive Hydraulic Cement
C0847-09 Specification for Metal Lath
C0897-05 Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters
C0911-06 Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses
C0917-05 Test Method for Evaluation of Cement Strength Uniformity From a Single Source
C0926-06 Specification for Application of Portland Cement-Based Plaster
C0932-06 Specification for Surface-Applied Bonding Compounds for Exterior Plastering
C0933-07B Specification for Welded Wire Lath
C0954-07 Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
C0955-09 Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
C0956-04 Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete
C0977-03 Specification for Quicklime and Hydrated Lime for Soil Stabilization
C1002-07 Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
C1005-05 Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
C1007-08A Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
C1012-04 Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
C1032-06 Specification for Woven Wire Plaster Base
C1038-04 Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
C1047-09 Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
C1063-08 Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
C1097-07 Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Pavements
C1157-08A Performance Specification for Hydraulic Cement
C1164-92R03 Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
C1177_C1177M-08 Specification for Glass Mat Gypsum Substrate for Use as Sheathing
C1178_C1178M-08 Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel
C1222-06 Practice for Evaluation of Laboratories Testing Hydraulic Cement
C1264-05 Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products
C1271-99R06 Test Method for X-ray Spectrometric Analysis of Lime and Limestone
C1278_C1278M-07A Specification for Fiber-Reinforced Gypsum Panel
C1280-09 Specification for Application of Gypsum Sheathing
C1301-95R01 Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
C1318-95R01 Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
C1328-05 Specification for Plastic (Stucco) Cement
C1329-05 Specification for Mortar Cement
C1355_C1355M-96R06 Specification for Glass Fiber Reinforced Gypsum Composites
C1356-07 Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure
C1365-06 Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
C1381_C1381M-97R08E01 Specification for Molded Glass Fiber Reinforced Gypsum Parts
C1396_C1396M-06A Specification for Gypsum Board
C1397-05 Practice for Application of Class PB Exterior Insulation and Finish Systems
C1437-07 Test Method for Flow of Hydraulic Cement Mortar
C1467_C1467M-00R06 Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts
C1489-01R08E01 Specification for Lime Putty for Structural Purposes
C1506-08 Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
C1513-04 Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
C1516-05 Practice for Application of Direct-Applied Exterior Finish Systems
C1529-06A Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses
C1535-05 Practice for Application of Exterior Insulation and Finish Systems Class PI
C1546-02R08E01 Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems
C1565-04 Test Method for Determination of Pack-Set Index of Portland Cement
C1597M-04 Specification for Gypsum Wallboard (Hard Metric Sizes)
C1600_C1600M-08 Specification for Rapid Hardening Hydraulic Cement
C1608-07 Test Method for Chemical Shrinkage of Hydraulic Cement Paste
C1629_C1629M-06 Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels
C1658_C1658M-06 Specification for Glass Mat Gypsum Panels
C1707-09 Specification for Specification for Pozzolanic Hydraulic Lime for Structural Purposes
D6249-06 Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals

相关标准 < 1 2 3 4 5 6 7 8 9 10 ... >

ISO 4463-3-1995 建筑物的测量方法 定线和测量 第3部分:观测和测量作业所获资料的检查目录
ISO 4463-2-1995 建筑物的测量方法 定线和测量 第2部分:测站和目标
ISO/PAS 22539-2007 ISO 15928用户指南.房屋.性能描述
ISO 3880-1-1977 房屋建筑 楼梯 词汇 第1部分 两种语言版
ISO 6707-2-1993 建筑和土木工程 词汇 第2部分:合同术语 两种语言版
ISO 9882-1993 建筑物的性能标准 预制混凝土楼板的性能试验在非集中荷载下的工况
ISO 9883-1993 建筑物的性能标准 预制混凝土楼板的性能试验 在集中荷载下的工况
ISO 9699-1994 建筑物的性能标准 简要检验项目 建筑设计的简要内容
ISO/R 1226-1970 门,窗和百叶窗的关闭方向和立面的符号标记.第1部分
ISO 1804-1972 门 术语
下载相关目录

客 服 中 心

购书:010-68158435(兼传真)
   010-51769915
垂询:010-88287798
Q Q:314095987

您浏览过的标准

常 见 问 题