网上书店│  标准│  公告│  动态│  购物指南
搜索
您当前的位置:首页 > 美国材料与试验协会(ASTM)
ASTM Section3 03.01 ASTM标准年鉴 第3部分:金属试验方法和分析程序 03.01卷 金属 机械试验;高温和低温试验;金相学
【标准定价】2,554.00



由北京创力中标图书有限公司直接发书。
快递:通常1~3天送达。
【标准编号】 ASTM Section3 03.01
【标准名称】 ASTM标准年鉴 第3部分:金属试验方法和分析程序 03.01卷 金属 机械试验;高温和低温试验;金相学
【英文名称】 Metals Test Methods and Analytical Procedures 03.01 Metals—Mechanical Testing;Elevated and Low-Temperature Tests;Metallography
【出版单位】 American Society for Testing and Materials

【中标分类】 H 冶金 > H20/29 金属理化性能试验方法 > H20 金属理化性能试验方法综合
【代替标准】

【发布部门】 American Society for Testing and Materials
【归口单位】 ASTM/TC E04~
【发布日期】
【实施日期】
【出版日期】 2009年7月
【开本页数】 16 开 / 1512 页
内容简介

Volume 03.01 covers tests and practices that outline the standard procedures needed to perform mechanical testing. This includes machine calibration, bend and flexure testing, compression, ductility, formability, elastic properties, impact, linear thermal expansion, shear, torsion, residual stress, tension testing, structural films for MEMS, and electronic applications.

Other standards cover fatigue and fracture testing of materials, including crack tip opening displacement (CTOD), fracture toughness measurement, and linear elastic plane-strain fracture toughness of metallic materials.Also featured are metallography tests and practices that define standard optical, electron, and X-ray procedures for determining the constituents and structure of metals and alloys.

卷 03.01
金属 机械试验;高温和低温试验;金相学

包括机器校准、弯曲试验、张力试验等机械试验的标准程序,也包括金相试验和确定金属和合金的成分和结构使用的光学、电子和X射线程序的标准规程。

1512页, 127个标准(详见以下“标准目录”)

目  录

E0003-01R07E01 Guide for Preparation of Metallographic Specimens
E0004-08 Practices for Force Verification of Testing Machines
E0006-09A Terminology Relating to Methods of Mechanical Testing
E0007-03 Terminology Relating to Metallography
E0008_E0008M-08 Test Methods for Tension Testing of Metallic Materials
E0010-08 Test Method for Brinell Hardness of Metallic Materials
E0018-08B Test Methods for Rockwell Hardness of Metallic Materials
E0021-09 Test Methods for Elevated Temperature Tension Tests of Metallic Materials
E0023-07AE01 Test Methods for Notched Bar Impact Testing of Metallic Materials
E0045-05E02 Test Methods for Determining the Inclusion Content of Steel
E0074-06 Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
E0081-96R07 Test Method for Preparing Quantitative Pole Figures
E0082-91R07 Test Method for Determining the Orientation of a Metal Crystal
E0083-06 Practice for Verification and Classification of Extensometer Systems
E0092-82R03E02 Test Method for Vickers Hardness of Metallic Materials
E0103-84R02 Test Method for Rapid Indentation Hardness Testing of Metallic Materials
E0110-82R02 Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
E0111-04 Test Method for Youngs Modulus, Tangent Modulus, and Chord Modulus
E0112-96R04E02 Test Methods for Determining Average Grain Size
E0132-04 Test Method for Poissons Ratio at Room Temperature
E0139-06 Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
E0140-07 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
E0143-02R08 Test Method for Shear Modulus at Room Temperature
E0190-92R08 Test Method for Guided Bend Test for Ductility of Welds
E0208-06 Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
E0209-00R05 Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
E0238-84R08 Test Method for Pin-Type Bearing Test of Metallic Materials
E0251-92R03 Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
E0290-97AR04 Test Methods for Bend Testing of Material for Ductility
E0292-09 Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
E0328-02R08 Test Methods for Stress Relaxation for Materials and Structures
E0338-03 Test Method of Sharp-Notch Tension Testing of High-Strength Sheet Materials
E0340-00R06 Test Method for Macroetching Metals and Alloys
E0345-93R08 Test Methods of Tension Testing of Metallic Foil
E0381-01R06 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
E0384-08AE01 Test Method for Microindentation Hardness of Materials
E0399-08 Test Method for Linear-Elastic Plane-Strain Fracture Toughness Ic of Metallic Materials
E0407-07 Practice for Microetching Metals and Alloys
E0436-03R08 Test Method for Drop-Weight Tear Tests of Ferritic Steels
E0448-82R08 Practice for Scleroscope Hardness Testing of Metallic Materials
E0466-07 Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
E0467-08 Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System
E0468-90R04E01 Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
E0517-00R06E01 Test Method for Plastic Strain Ratio for Sheet Metal
E0561-08 Test Method for Curve Determination
E0562-08 Test Method for Determining Volume Fraction by Systematic Manual Point Count
E0602-03 Test Method for Sharp-Notch Tension Testing with Cylindrical Specimens
E0604-83R08 Test Method for Dynamic Tear Testing of Metallic Materials
E0606-04E01 Practice for Strain-Controlled Fatigue Testing
E0633-00R05 Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800|SDF (1000|SDC) in Air
E0646-07 Test Method for Tensile Strain-Hardening Exponents ( -Values) of Metallic Sheet Materials
E0647-08 Test Method for Measurement of Fatigue Crack Growth Rates
E0739-91R04E01 Practice for Statistical Analysis of Linear or Linearized Stress-Life () and Strain-Life (|g@-) Fatigue Data
E0740-03 Practice for Fracture Testing with Surface-Crack Tension Specimens
E0766-98R08E01 Practice for Calibrating the Magnification of a Scanning Electron Microscope
E0768-99R05 Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel
E0837-08 Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
E0855-08 Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
E0883-02R07 Guide for Reflected\NLight Photomicrography
E0915-96R02 Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
E0930-99R07 Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
E0963-95R04 Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte
E0975-03R08 Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation
E0986-04 Practice for Scanning Electron Microscope Beam Size Characterization
E1012-05 Practice for Verification of Test Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
E1049-85R05 Practices for Cycle Counting in Fatigue Analysis
E1077-01R05 Test Methods for Estimating the Depth of Decarburization of Steel Specimens
E1180-08 Practice for Preparing Sulfur Prints for Macrostructural Evaluation
E1181-02R08 Test Methods for Characterizing Duplex Grain Sizes
E1221-06 Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, Ia, of Ferritic Steels
E1237-93R03 Guide for Installing Bonded Resistance Strain Gages
E1245-03R08 Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis
E1268-01R07 Practice for Assessing the Degree of Banding or Orientation of Microstructures
E1290-08 Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
E1304-97R08E01 Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
E1319-98R03 Guide for High-Temperature Static Strain Measurement
E1351-01R06 Practice for Production and Evaluation of Field Metallographic Replicas
E1382-97R04 Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
E1426-98R03 Test Method for Determining the Effective Elastic Parameter for X-Ray Diffraction Measurements of Residual Stress
E1450-03 Test Method for Tension Testing of Structural Alloys in Liquid Helium
E1457-07E01 Test Method for Measurement of Creep Crack Growth Times in Metals
E1508-98R08 Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
E1544-99R04E01 Practice for Construction of a Stepped Block and Its Use to Estimate Errors Produced by Speed-of-Sound Measurement Systems for Use on Solids
E1558-99R04 Guide for Electrolytic Polishing of Metallographic Specimens
E1561-93R03 Practice for Analysis of Strain Gage Rosette Data
E1681-03R08 Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
E1685-00R06 Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique
E1820-08A Test Method for Measurement of Fracture Toughness
E1823-09A Terminology Relating to Fatigue and Fracture Testing
E1856-97R08 Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines
E1875-08 Test Method for Dynamic Youngs Modulus, Shear Modulus, and Poissons Ratio by Sonic Resonance
E1876-09 Test Method for Dynamic Youngs Modulus, Shear Modulus, and Poissons Ratio by Impulse Excitation of Vibration
E1920-03R08 Guide for Metallographic Preparation of Thermal Sprayed Coatings
E1921-09A Test Method for Determination of Reference Temperature, o, for Ferritic Steels in the Transition Range
E1922-04 Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
E1928-07 Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing
E1942-98R04 Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
E1949-03 Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
E1951-02R07 Guide for Calibrating Reticles and Light Microscope Magnifications
E2014-99R05 Guide on Metallographic Laboratory Safety
E2015-04 Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination
E2109-01R07 Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
E2142-08 Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
E2207-08 Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens
E2208-02 Guide for Evaluating Non-Contacting Optical Strain Measurement Systems
E2218-02R08 Test Method for Determining Forming Limit Curves
E2244-05 Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
E2245-05 Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
E2246-05 Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
E2248-09 Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens
E2283-08 Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features
E2298-09 Test Method for Instrumented Impact Testing of Metallic Materials
E2309-05 Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines
E2368-04E01 Practice for Strain Controlled Thermomechanical Fatigue Testing
E2428-08 Practice for Calibration of Torque-Measuring Instruments for Verifying the Torque Indication of Torque Testing Machines
E2443-05 Guide for Verifying Computer-Generated Test Results Through The Use Of Standard Data Sets
E2444-05E01 Terminology Relating to Measurements Taken on Thin, Reflecting Films
E2448-08 Test Method for Determining the Superplastic Properties of Metallic Sheet Materials
E2472-06 Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
E2492-07 Test Method for Evaluating Springback of Sheet Metal Using the Demeri Split Ring Test
E2546-07 Practice for Instrumented Indentation Testing
E2624-09 Practice for Torque Calibration of Testing Machines and Devices

相关标准 < 1 2 3 >

ISO 8044-1999 金属与合金的腐蚀 基本术语和定义 三种语言版
ISO 7539-8-2000 金属与合金的腐蚀 应力腐蚀试验 第8部分:评估焊件试样的制备和使用
ISO 3785-2006 金属材料.试样轴线相对于产品结构的标识
ISO/TR 12735-2-1996 金属的机械试验 用于定义的符号 第2部分:制定符号和定义的建议
ISO 2626-1973 铜 氢脆试验
ASTM Section 3 ASTM标准年鉴 第3部分:金属试验方法和分析程序 [卷03.01~03.06]
ASTM Section3 03.02 ASTM标准年鉴 第3部分:金属试验方法和分析程序 03.02卷 磨损和腐蚀;金属腐蚀
ASTM Section3 03.03 ASTM标准年鉴 第3部分:金属试验方法和分析程序 03.03卷 无损检测
ASTM Section3 03.04 ASTM标准年鉴 第3部分:金属试验方法和分析程序 03.04卷 磁性
ASTM Section3 03.05 ASTM标准年鉴 第3部分:金属试验方法和分析程序 03.05卷 金属、矿石和相关材料的化学分析:E32-latest
下载相关目录

客 服 中 心

购书:010-68158435(兼传真)
   010-51769915
垂询:010-88287798
Q Q:314095987

您浏览过的标准

常 见 问 题