网上书店│  标准│  公告│  动态│  购物指南
搜索
您当前的位置:首页 > 美国材料与试验协会(ASTM)
ASTM Section1 01.08 ASTM标准年鉴 第1部分:钢铁产品 01.08卷 紧固件;滚动轴承
【标准定价】1,790.00



由北京创力中标图书有限公司直接发书。
快递:通常1~3天送达。
【标准编号】 ASTM Section1 01.08
【标准名称】 ASTM标准年鉴 第1部分:钢铁产品 01.08卷 紧固件;滚动轴承
【英文名称】 Iron and Steel Products 01.08 Fasteners; Rolling Element Bearings
【出版单位】 American Society for Testing and Materials

【中标分类】 H 冶金 > H40/59 钢铁产品 > H40 钢铁产品综合
【代替标准】

【发布部门】 American Society for Testing and Materials
【归口单位】 ASTM/TC A01~
【发布日期】
【实施日期】
【出版日期】 2009年1月
【开本页数】 16 开 / 1000 页
内容简介

Volume 01.08 contains specifications for various internally and externally threaded fasteners, and non-threaded and driven fasteners.

It also includes standards on rolling element bearings that establish the physical and mechanical properties for bearings to be used in automotive and aerospace applications.

卷 01.08
紧固件;滚动轴承

包括各种内螺纹和外螺纹紧固件,以及非螺纹和驱动紧固件的特性、质量保证要求的规范,汽车和航空用轴承的质量保证和机械特性的标准。

1000页, 96个标准(详见以下“标准目录”)

目  录

A0031-04E01 Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
A0307-07B Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
A0325-07A Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
A0325M-08 Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength \[Metric\]
A0354-07A Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
A0394-07 Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
A0449-07B Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
A0489-04E01 Specification for Carbon Steel Lifting Eyes
A0490-08A Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
A0490M-04AE01 Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)
A0502-03 Specification for Rivets, Steel, Structural
A0563-07A Specification for Carbon and Alloy Steel Nuts
A0563M-07 Specification for Carbon and Alloy Steel Nuts (Metric)
A0574-04E01 Specification for Alloy Steel Socket-Head Cap Screws
A0574M-04E01 Specification for Alloy Steel Socket-Head Cap Screws (Metric)
D3337-91R02 Test Method for Determining Life and Torque of Lubricating Greases in Small Ball Bearings
F0432-04 Specification for Roof and Rock Bolts and Accessories
F0436-07A Specification for Hardened Steel Washers
F0436M-04 Specification for Hardened Steel Washers (Metric)
F0467-08 Specification for Nonferrous Nuts for General Use
F0467M-06AE02 Specification for Nonferrous Nuts for General Use (Metric)
F0468-06E01 Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
F0468M-06E01 Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
F0541-04E01 Specification for Alloy Steel Eyebolts
F0547-06 Terminology of Nails for Use with Wood and Wood-Base Materials
F0568M-07 Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners (Metric)
F0592-84R06 Terminology of Collated and Cohered Fasteners and Their Application Tools
F0593-02R08 Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
F0594-08 Specification for Stainless Steel Nuts
F0606-07 Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
F0606M-07 Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric)
F0680-80R07 Test Methods for Nails
F0738M-02R08 Specification for Stainless Steel Metric Bolts, Screws, and Studs
F0788_F0788M-07 Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
F0812_F0812M-07 Specification for Surface Discontinuities of Nuts, Inch and Metric Series
F0835-04E01 Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
F0835M-04 Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)
F0836M-02 Specification for Style 1 Stainless Steel Metric Nuts (Metric)
F0837-08 Specification for Stainless Steel Socket Head Cap Screws
F0837M-02A Specification for Stainless Steel Socket Head Cap Screws \[Metric\]
F0844-07A Specification for Washers, Steel, Plain (Flat), Unhardened for General Use
F0879-02AR08 Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
F0879M-02AR08 Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)
F0880-02R08 Specification for Stainless Steel Socket-Set Screws
F0880M-02R08 Specification for Stainless Steel Socket Set Screws (Metric)
F0901-01R07 Specification for Aluminum Transmission Tower Bolts and Nuts
F0912-04E01 Specification for Alloy Steel Socket Set Screws
F0912M-04E01 Specification for Alloy Steel Socket Set Screws (Metric)
F0959-07A Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
F0959M-07 Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners (Metric)
F1077-05 Guide for Selection of Committee F16 Fastener Specifications
F1135-99R04 Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners
F1136-04 Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners
F1136M-04 Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners (Metric)
F1137-00R06 Specification for Phosphate/Oil and Phosphate/Organic Corrosion Protective Coatings for Fasteners
F1428-92R05 Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
F1469-99R04 Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing
F1470-02 Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
F1503-02R07 Practice for Machine/Process Capability Study Procedure
F1554-07A Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
F1575-03 Test Method for Determining Bending Yield Moment of Nails
F1667-05 Specification for Driven Fasteners: Nails, Spikes, and Staples
F1789-08B Terminology for F16 Mechanical Fasteners
F1852-07 Specification for |P Twist Off|P Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
F1940-07A Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
F1941-07 Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))
F1941M-07 Specification for Electrodeposited Coatings on Threaded Fasteners (Metric)
F2094-06E01 Specification for Silicon Nitride Bearing Balls
F2161-01 Guide for Instrument and Precision Bearing Lubricants\MPart 1 Oils
F2162-01R08 Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type
F2163-01R08 Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring
F2215-05E02 Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications
F2246-06E01 Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage
F2280-08 Specification for |P Twist Off|P Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength
F2281-04 Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
F2282-03 Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
F2328-05 Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs
F2328M-07 Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs (Metric)
F2329-05 Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
F2332-06 Specification for Annular Ball Bearings for Instruments and Precision Rotating Components
F2403-06 Specification for Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength
F2430-04 Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race)
F2431-04 Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring
F2437-06 Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
F2443-04 Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End
F2444-04 Practice for Damage Prevention of Bearings, and Bearing Components Through Proper Handling Techniques
F2482-05 Specification for Load-Indicating Externally Threaded Fasteners
F2488-05 Terminology for Rolling Element Bearings
F2489-06 Guide for Instrument and Precision Bearing Lubricants\MPart 2 Greases
F2511-05E01 Specification for Rollers, Bearing, Needle, Ferrous, Solid
F2590-06E01 Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type
F2591-06 Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series)
F2661-07 Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer
F2674-07 Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners \[Metric\]
F2688-08 Guide for System-Based, Customer-Centered Quality Plan for Manufacturers

相关标准 < 1 2 3 4 5 6 7 8 9 10 ... >

ISO 683-10-1987 热处理钢、合金钢和易切钢 第10部分:压力加工渗氮钢
ISO 10474-1991 钢和钢制品 检验文件
ISO 404-1992 钢和钢制品 一般交货技术条件
ISO 683-15-1992 热处理钢、合金钢和易切钢 第15部分:内燃机用阀门钢
ISO 10714-1992 钢和铁 磷含量的测定 磷钒钼酸盐分光光度法
ISO 10278-1995 钢 锰含量的测定 电感藕合等离子体原子发射光谱测定法
ISO 4950-3-1995 高屈服强度扁钢材.第3部分:按热处理(淬火+回火)条件提供的钢材
ISO 4950-1-1995 高屈服强度扁钢材.第1部分:一般要求
ISO 4950-2-1995 高屈服强度扁钢材.第2部分:按正火或受控轧制条件提供的钢材
ISO 11950-1995 冷轧电镀铬/氧化铬涂层钢板
下载相关目录

客 服 中 心

购书:010-68158435(兼传真)
   010-51769915
垂询:010-88287798
Q Q:314095987

您浏览过的标准

常 见 问 题